BLEMISH LT | MT MUD LORD 35x12.5R20 10 PLY REMOLD USA
Crafted for the MT off-road enthusiast who also has to commute on highway: The Mud Lord is specifically designed for the driver who needs a combination of highway and off-road performance with new aggressive sidewall lugs. The Mud Lord has a more condensed lug tread pattern, which delivers a quieter highway ride between adventures without losing the benefits of a mud tire for hunting, boating and fishing expeditions. Your truck, Jeep or SUV will find the perfect balance between on/off-road conditions with the TreadWright Mud Lord.
Typical blemishes are:
Short Shot - This means that the rubber did not completely fill and press in the mold on a tread lug. The tire will still perform, it just ends up with a few lines in the tread block. The rubber is still the same density and should wear normally. 
Sidewall Blem - A sidewall blem is due to not enough even heat on the sidewall plate on a Bead to Bead tire. In this situation it does not completely cure the sidewall leaving a ring around the tire. Most customers just mount this side in, since it usually only happens on one side of the tire.
Balancing Weight - Many of our blems may require additional weight to balance the tire (up to 12 ounces).
Tread Block - Some tires can have an extra layer of rubber considered Tread Block
- DETAILS
- SPECS
- HIGHLIGHTS
- With a more condensed center lug pattern you will get less road noise and lateral drift than a traditional high void lug mud terrain tire without losing off-road performance. The TreadWright Mud Lord features new aggressive side lugs which add an extreme look to any vehicle and the extra grip needed to push through those loose off-road surfaces . The Mud Lord's tread blocks have traditional siping grooves for wet conditions combined with a three lug off-set center pattern for more stability. The Mud Lord demonstrates an excellent cross-over performance that perfectly blends on/off highway mud terrain characteristics.
-
This tire is a Blemished Tire (see above)
- Tire Tread Depth: 19/32”
Load Index: 121
Tire Weight: 76LBS
Speed Rating: Q
Studdable: No
Meas. Rim Width: 9"
Rim Width Range: 8.5-9.5"
Tire Tread Width: 10 1/2”
Section Width: 12"
Outer Tire Diameter: 34 3/4”
Max PSI: 65 psi
Max Load: 3,195 lbs
Kedge Grip: Avg. 20,000 Miles
Standard Wear: 30,000 Miles
Premier Wear: 40,000 Miles
- Tire Tread Depth: 19/32”
*Treadwright Tires recommend static balancing of our tires. Due to our aggressive lugs and that we static balance our tires during production, static balancing is the best option.
